Getting an Audi Replacement Key
If you have an Audi vehicle and your key has been lost or taken, you can get an alternative key from the dealership or a locksmith.
A new key may cost just $280 or up to $475. Programming the key to your model could cost you an additional fee.
Lost or Damaged Keys
If your keys have become damaged or lost it is possible that you require an Audi replacement key. A replacement key can allow you to get into your vehicle and start the engine. A new key can be very expensive.
The average cost of a new key may range from $280 to $475 dependent on the type of key you want and the location. Additional fees may be charged by Audi dealers to program your new key to your vehicle.
A locksmith can also cut keys for you. This will help you save money when compared to visiting the dealer.
Locksmiths typically use an exclusive cutting machine to cut your new key. They will then change the code to work with your car. This service may be charged by some locksmiths, but it's worth it if you a quick need for a key, but do not wish to hassle going to the dealership.
It is essential to note that the key won't turn the car on until it has been programmed to work with your car. This could be confusing, so make sure to ask the locksmith or dealer.
A replacement key is typically one week from the manufacturer. However, it is possible to delay this time. Once it's done, the dealer will notify you.
Before you leave the locksmith or dealership, be sure to carry all of your documents. This includes your driver's licence as well as your registration. You'll need these documents to prove you are the owner of your car and to get a replacement key.
Once you have all of the information you need, it's time to order your new key. It is possible to do this either online or by phone. Some dealers will accept credit cards for this process, but it is always recommended to make a call and confirm.
A good locksmith should be able to duplicate any type of key that is audi, even a replacement key. The key will be created with an exclusive serial number, and will also have an transponder chip. This will stop other thieves from trying to steal your car.
Key Replacement Fob Battery
The low-battery indicators on the fob's key are a sign that it's time to replace the battery. This will resolve any issues with the buttons on the fob and allow you to use it again without waiting for an expert.
First, find out what type of battery your key fob has. Certain key fobs have CR2032 coin cells or button cells, and others have rechargeable versions. You can find out the kind of battery by looking at the back of the fob.
Common lithium batteries that are used in key fobs are CR2032 batteries. They measure 20 x 3 mm in size. 0.7874 x 0.126 inches). They feature a nominal voltage of 3.0 V and a cutoff voltage of 2.0 V, and they can last for 210 to 230 mAh at full charge.
Lithium Manganese Dioxide battery batteries are also used by key fobs. These batteries can be recharged. They are available in a variety naming schemes including DL2016 and ECR2016. They can also last for a long time, with a 1000+ charging and recharging cycles.
First, remove the key fob's battery using a screwdriver with a flat-head. Certain models are designed to be opened by pulling on the front of the device, while others include a screw or release button on the back.
Then, you need to remove the cover from the key blade using the aid of a small screwdriver. This can be tricky so be cautious.
If you are having trouble taking the cover off, try pushing the head of your key blade on the tab that holds in the black cover piece. This will help you break the cover off quickly, and expose the battery inside the key.
After you have removed the battery from your key, install the new CR2032 CR2032 battery in the same place on the back. Be sure to align the positive side of the battery with its negative side, and that you install it correctly.
If you're not sure what to do to replace the battery in the key fob, check the owner's guide. It should contain the steps needed to open the key and the exact type of battery you must use.
Transponder/Remote Programming
A transponder key can be described as a type of car key that contains chips. When it is inserted into the ignition lock, the chip sends an electronic signal to the car's on-board computer that is identical to the serial number of the digital chip in the key. This allows the driver to begin and control the engine.
This technology has been employed by most automobile manufacturers to replace traditional keys since the 1990s. It is also used in offices, homes and hotels.
Some vehicles have a remote key fob that can be reprogrammed by the owner of the car. It's a simple process, but it can require a significant amount of time to accomplish it correctly.
Once the new key has been programmed and you have it, you can use it to unlock and lock your vehicle as well as activate remote controls. If the new key doesn't work, you'll have to get it reprogrammed by the manufacturer or an auto locksmith.
The best method to accomplish this is to purchase an cloning device that will copy a particular type of transponder key blank flip key, remote or fob. These devices are available at companies like Ilco, Jet Hardware and Keyline USA.
By using the right device you can program your new key and make sure that it is compatible with your Audi. Some devices can read and reset error codes from your vehicle's immobilizer, determine how many keys you have programmed and then reprogramme remote keyless access systems.
To begin the program to begin the process, insert your key into the ignition and hold the lock/unlock buttons for 2 seconds. The lights should blink once. Then press the unlock button once more. This will erase any previous keys your car might have stored in its memory.
You can repeat this procedure multiple times to make sure that the remote is correctly programmed. If you are satisfied that the keys are working then you can take them from the ignition to leave the programming mode.
After you have reprogrammed your keys you can test each one to determine whether it works or not. If the new keys don't work then try them again, or ask a dealer for help.
Keys to the Dealership
There are a myriad of options when it comes to obtaining a replacement key for your Audi. You can go to the dealer, obtain one from an automotive locksmith or even purchase one online from a company like Audi Key Pro.
Cost of a new key will vary based the location from which it is purchased, the type of key you need, and how many you require. A new key for an Audi A3 could cost between $280 and $475 , with an additional fee for programming.
We recommend speaking to the local locksmith to find an alternative to save money. They can make you a new lock at less than the dealer. They might also have the tools to program your keys, so you don't have to pay more money at the dealership.
It is also important to know that the majority of car dealers don't have the equipment required to program new Audi keys, so you will need to find a locksmith that can do that. In addition, it could take some time to cut and program the key in an auto dealer's workshop.
It is usually more affordable to visit locksmiths for Audi key replacement. In some instances you can save $200 or more if choose locksmiths instead of the dealer.
Another option to reduce the costs of a replacement key is to buy a second key. Keys are usually sold at hardware stores and big box retailers for less than $10.
If you have to borrow or lend a second key in an emergency, for instance, when your vehicle has been repaired or you are moving and have lost your original key is a great idea. You can store a spare in a safe location to ensure that you have access to here it.
It is also necessary to change the battery on modern electronic key fobs. This is because the battery will get depleted, meaning the key won't work. For more information on how to replace the battery, consult the owner's manual.